Categories

Loco Kits & Tenders Castings Rolling Stock E-mail Dave Bradwell Dave Bradwell Home

Castings from the kits

All parts of my kits, such as castings, are available separately although I will not split brass sprues or sets of whitemetal parts. Some valves/lubricators do not have wheels as these are separate etchings which I cannot supply separately. All are brass unless described otherwise.
As I do not keep a large stock of spares delivery can be protracted if the part you want is out of stock, brass castings for example, take 12 weeks after I place an order. It is advisable to enquire before ordering. Please include £1.50 for postage.

 

LNER J27 0-6-0 and tender

Mould 1. - £5.50
Comprises: injector, safety valve, sander crank, PV cover, tender cock, front buffer, filler lid, safety chain base, brake standard. (2 reqd)

 
Mould 2. - £5.50
Comprises: 3 diff. whistles, 2 smokebox darts, NE blower valve, NE recirculating valve, mech lubricator.

 
Mould 3. - £5.50
Comprises: Pair backhead injectors, clacks, turret, brake valve, blower valve, blowdown cock.

 
Mould 4. - £5.50
Comprises: LNE chimney, pop s.v. base, round dome, low dome, LNE snifting valve.

 
Mould 5. - £5.50
Comprises: NER chimney, safety valve cover & valves (no levers), NER dome.

 
Mould 6. - £5.50
Comprises: 8 buffer bases of 2 types (undrilled), 2 sandbox lids.

 
Set Whitemetal castings - £8-00 Comprises: 2 x smokebox doors, backhead, piano frontboiler weights, tender toolboxes (early & late), dome, vents, filler, axleboxes.

 

Chassis kit for LNER B1.

Mould 7. - £5.50
Comprises: 2 each - crossheads, glands, pr. draincocks.

 
Mould 8. - £5.50
Comprises: Flatter smokebox door, PV front heads, PV rear heads with valve guides, ecc rod brg. cover.

 
Mould 9.  - £7.00
Comprises: Chimney, dome, later std. smokebox door, dart.

 

LNER 4200 gallon group standard tender.

Mould 10. - £5.50
Comprises: Rivetted dome, welded dome, filler, water treatment filler.

 
Set #.  - £6.00
Comprises: 2 types brake handle, scoop handle, 2 water valve handles, cock, vac pipe, steam heat pipe, 2 elbows.

 
Set #.  - £6.00
Comprises: Separate spring hangers - 7LH, 7RH - long

 
Set #.  - £6.00
Comprises: Separate spring hangers - 7LH, 7RH - short

 
Set whitemetal castings - £8.00
Includes: 2 sets springs, axleboxes - for 4200 and 3500 gallon tenders. (these need cast spring hangers above)

 

Ex-WD Austerity 2-8-0 and tender

Mould 11.  - £5.50
2 reqd. per loco. Comprises: PV heads - front, rear with guide, gland, crosshead nose, cocks, injector.

 
Mould 12. - £5.50
2 reqd. per tender. Comprises: 5 spring hanger brackets, 3 rocker brackets, brake shaft bearing, water valve handle, front buffer.

 
Mould 13. - £5.50
1 reqd. per tender. Comprises: Vac. pipe, handbrake, filler, 2 air vents, front buffing pad, water treatment filler.

 
Mould 14. - £5.50
2 reqd. per loco. Comprises: 3 sandbox fillers - 2 bent, one straight, steampipe, long oil boxes, short oil boxes, bearing, safety valve, trap, water valve handles.

 
Mould 15. - £7.00
1 reqd. per loco. Comprises: Chimney, dome, whistle, top feed, snifter-WD, snifter-LNE type, ejector elbow, smokebox dart.

 
Mould 16. - £5.50
1 reqd. per loco. Comprises: reverser, smokebox saddle, vac. pipe, safety valve base, 2 sandbox fillers.

 
Mould 17. - £5.50
Cab fittings, 1 reqd. per loco. Comprises: Vacuum ejector, combination brake valve, manifold, Detroit lubricator, blower valve.

 
Set whitemetal castings - £8.00
Comprises: Backhead and gauges, brake cylinders, smokebox door, AWS battery box, rear sandboxes, pony springs, tender axleboxes with springs.

 

Chassis kit for BR - 9F

Mould 18. - £6.00
2 reqd. per loco. Comprises: Crosshead, PV rear and valve spindle guide, relief valve, steam passage.

 
Mould 19. - £6.00
2 reqd. per loco. Comprises: PV front, relief valve, steam passage, lubricator, ecc. rod brg. cover, brake cylinder.

 
Mould 20. - £6.00
1 reqd. per loco. Comprises: reverser spring casing, dragbox, pony damper, AWS batt. box (NE type), drains-LH & RH.

 

LNER K1 2-6-0 Locomotive

Mould 21. - £5.50
(2 reqd). 4 spring dampers, PV heads front and rear, sandpipe, crosshead nose, ecc rod brg cover, piston gland.

 
Mould 22. - £5.50
Drain cocks LH & RH, 4 spring dampers, sandpipe, blowdown valve, front cyl covers LH&RH.

 
Mould 23. - £5.50
(2 reqd). Wakefield lubricator, 2 oil boxes, 2 sandbox lids & pipes, rear sandbox lid, safety valve, half rear"bumper", injector, sandpipe, tiny lubricator manifold.

 
Mould 24. - £5.50
Cab reverser, whistle, front vac pipe, heating pipe, blower elbow, cock on smokebox, sandpipe, AWS reservoir.

 
Mould 25. - £5.50.
5 electric lamps, generator, speedo brkt, junction box, water gauge, snifter. 

 
Mould 26. - £5.50
Cab fittings - manifold, backhead clacks, blower valve, vac ejector.

 
Mould 27. - £5.50
5 electric lights, water gauge, steam heat reducing valve, AWS cab box.

 
Set whitemetal castings - £8.00
Backhead, gauges, cab seats, brake cyls, loco vac reservoir, pr sandboxes, AWS battery box, pony springs, tender springs (need cast spring hangers - above), scoop.

 

A1

Mould 28. - £6.00
Pr. Rear piston valve heads, front valve head, 2 glands, 2 ecc rod brg covers, AWS battery box.

 
Mould 29. - £6.00
Pr. Crossheads, pr. draincocks, single front piston valve head.

 

Q6

Mould 30. - £7.00
Chimney, 2 domes, safety valve base, snifter.

 
Mould 31. - £5.50
2 reqd. step injector, sandbox crank, 3 oil boxes, 2 gland lubricators, rear oil box, safety valve, 2 sandbox lids.

 
Mould 32. - £5.50
Sandbox crank, reverser steam valve, NER twin whistles, single whistle, smokebox dart, smokebox wheel and handle, recirculating valve, blower valve, 2 sandbox lids, mechanical lubricator.

 
Mould 33. - £5.50
Backhead fittings: blower, brake, turret, NER injectors, later clacks.

 
Whitemetal castings - Q6 & tender - £8.00
2 smokebox doors, sandboxes LH & RH, backhead, 2 slidebar brkts, 6 each tender axleboxes & springs of 3 types, 2 tool boxes. Note springs need moulds 35 or 36 to complete.

 

NER Tender

Mould 34. - £5.50
Cock, Upper water valves, 2 types handbrake bracket, 2 safety chain bases, filler lid.

 
Mould 35. - £5.50
12 short spring hangers.

 
Mould 36. - £5.50
12 long spring hangers.

 
Mould 37. - £5.50
Additional parts: 2 types scoop bracket, later dome, vac. pipe, heating pipe.

 
Mould 38. - £5.50
NER parts for Q6 kit: 4 buffer bases, 2 vents, scoop handle bracket.

 
Whitemetal castings - NER tenders - £8.00
3 types tender axleboxes & springs (need brass hangers), vents, scoop, dome, brake cylinders (incl. vac), 2 types toolboxes, Westinghouse reservoir, top vac. reservoir. Note springs need moulds 35 or 36 to complete.

Hosted by The Scalefour Society